[DeTomaso] PI Headers and Mufflers

Ed Pike erpike at ymail.com
Fri Nov 21 11:37:44 EST 2008


Mike:

No I did not. I totally forgot about that! I think that is a winter project now.

Thanks,
Ed...

 

________________________________
From: Mike Thomas <mbefthomas at comcast.net>
To: Ed Pike <erpike at ymail.com>
Cc: pantera list <detomaso at realbig.com>
Sent: Thursday, November 20, 2008 8:32:35 PM
Subject: RE: [DeTomaso] PI Headers and Mufflers

Ed - If by "hang" did you mean on the half shaft?  did you reverse your half
shafts so the inner shaft is inboard, offering the exhaust more clearance?
Many guys have done this.
Mike Thomas 

-----Original Message-----
From: detomaso-bounces at realbig.com [mailto:detomaso-bounces at realbig.com] On
Behalf Of Ed Pike
Sent: Wednesday, November 19, 2008 1:12 PM
To: scottcouchman at yahoo.com
Cc: detomaso at realbig.com
Subject: Re: [DeTomaso] PI Headers and Mufflers

Scott:

I have those headers and their power pack mufflers(which i think are what
you are describing) and am very happy with them. I ran the pipes the same
way the stock exhaust was ran and the pipe fit. Tight fit but did fit. The
only issue I have is that when lifting the drivers rear wheel off the ground
i need to disconnect the pipe from the body because the suspension hangs.
Dont have that problem on the pass side. Might just be my car. The set up
has a good sound but not overwhelming. 

Ed...




________________________________
From: Scott Couchman <scottcouchman at yahoo.com>
To: detomaso at realbig.com
Sent: Wednesday, November 19, 2008 3:35:31 PM
Subject: [DeTomaso] PI Headers and Mufflers

Interested if anyone has experience with PI's headers and mufflers? The
headers are coated and non-coated and seem to look similar to ones I've seen
at other Pantera vendors. Their SS mufflers are $150-160 each and mate to 2
1/4" exhaust (I think they call it 2.5, but they seem to measure 2.25) and
fit into the stock locations. There can't be too much backpressure because
you can see right through them (look into the inlet pipe and you can see out
the outlet pipe). Just curious if anyone has experience....????


      
_______________________________________________

Detomaso Forum Managed by POCA

Archive Search Engine Now Available at http://www.realbig.com/detomaso/

DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso
_______________________________________________

Detomaso Forum Managed by POCA

Archive Search Engine Now Available at http://www.realbig.com/detomaso/

DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso


More information about the DeTomaso mailing list