[DeTomaso] X which is which, Dan?

[Daniel C Jones]

> Uh...so which is which?

Interesting.  I have two of the "7516" part number but none
"No. 7516" intakes on hand.  Oddly, they are different.
The first one has an A/B measurement of 4 3/16" and 5 1/8"
where the measurements represent the drop from a straight
edge laid across the carb pad to the closest point where the
end rail bends inward on each end.  The plenum depth is
approximately 2 5/8".  Runners are 1 1/2" wide by 2" tall.

My notes say the second one has ports that are more oval
shaped and measure 1 7/16" wide by 2 1/16" tall with A/B
measurements of 4 1/16" and 5".  I'll double check these
measurements when I get the chance.

> Are they both still available new?   And if not, is
> the 'desirable' one, i.e. the lower one, available new?

I dunno.

Dan Jones