[DeTomaso] 2V Heads?

[Göran Malmberg]

The area of the runner should increase all the way to the plenum.
If this is the situation the manifold is ok to use. It seem like some
epoxie job in the head area of the runner would be the way to go.
Goran
----- Original Message ----- 
From: "Garth Rodericks" <garth_rodericks at yahoo.com>
To: <detomaso at realbig.com>; <jmontero at fcmat.org>; "Mike Drew" 
<mikeldrew at aol.com>
Sent: Monday, November 17, 2008 7:06 AM
Subject: [DeTomaso] 2V Heads?


I'm putting Edlebrock aluminum 2V heads on my Cleveland build and called 
Edelbrock to
ask if they're compatible with my 4V Performer intake. Edelbrock tech 
support said "no,"
that I "needed a 2V Performer intake." But I think they just wanted to sell 
another intake.

A fellow PCNC member (I forgot who) at the Dyno Day event at the Sharp's 
last month has
a 4V Performer mated to his 2V Edelbrock heads. He said the ports matched 
quite well
with only a minor port-matching required. This is because the Edelbrock 2V 
intake has
LARGER ports than the stock 2V Cleveland head, AND the Performer 4V intake 
has
SMALLER ports/runners that the stock 4V Cleveland intake.




_______________________________________________

Detomaso Forum Managed by POCA

Archive Search Engine Now Available at http://www.realbig.com/detomaso/

DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso