[DeTomaso] Engine/ZF pull - instructions & recommendations?
MikeLDrew at aol.com
MikeLDrew at aol.com
Wed Nov 5 21:08:54 EST 2008
In a message dated 11/5/08 6 47 25, cengles at cox.net writes:
> I found the load leveler to be a problem. It my experience, it decreased
> the working room above the drivetrain and produced an embarassing dent in the
> undersurface of the rear roof requiring a gentle fix by my friendly paint and
> body man. Oops.
>
Sounds like the problem lay not with the load leveller, but the load leveller
LEVELLER. :>)
FWIW I have used them all the time. I lay the leveller down atop the carb
pad, then make the chains as short as possible to prevent that interference
problem.
Mike
**************
AOL Search: Your one stop for directions, recipes and all
other Holiday needs. Search Now.
(http://pr.atwola.com/promoclk/100000075x1212792382x1200798498/aol?redir=http://searchblog.aol.com/2008/11/04/happy-holidays-
from-aol-search/?ncid=emlcntussear00000001)
More information about the DeTomaso
mailing list