[DeTomaso] Techno question: aluminum flywheel washers

[JDeRyke at aol.com]

In a message dated 11/4/08 10:10:18 PM, bobfluty at att.net writes:

> I discovered that the bolts that held the pressure plate to the flywheel 
> were a tall hex head bolt and had been kissing the reinforcing bosses inside 
> the bell housing, causing the "bearing" noise.  The ARP bolts I bought for both 
> the pressure plate and the flywheel are a very low style fastener and will 
> not create interference problems in either location.
> 
Stock Ford grade 8 flywheel bolts are also a low-form bolt and are available 
at Autozone or NAPA if you're in a hurry sometime. Ford bolts are used by 
Formula car guys because they're good and because they're available anywhere. 
FWIW- J Deryke



**************
AOL Search: Your one stop for directions, recipes and all other 
Holiday needs. Search Now. 
(http://pr.atwola.com/promoclk/100000075x1212792382x1200798498/aol?redir=http://searchblog.aol.com/2008/11/04/happy-holidays-from
-aol-search/?ncid=emlcntussear00000001)