[DeTomaso] Split Loom Tubing needed for wiring

[Doug Braun]

Michael Shortt, I hadn't heard of this supplier before but they don't stock
the 3/16" ID I need.

And Paul, the spiral wrap will be my fallback solution.

And Michael in Savannah, the smallest Radio Shack lists is 1/2" ID and none
of the auto parts stores near me list anything smaller than 1/4".


Doug

-----Original Message-----
From: detomaso-bounces at realbig.com
[mailto:detomaso-bounces at realbig.com]On Behalf Of
michael at michaelshortt.com
Sent: Monday, November 03, 2008 12:22 PM
To: Paul
Cc: DeTomaso Forum
Subject: Re: [DeTomaso] Split Loom Tubing needed for wiring


http://www.cabletiesandmore.com/blackloom.php

Michael in Savannah

Radio Shack  Advance and Auto Zone sells some as well

On Mon, Nov 3, 2008 at 3:17 PM, Paul - Home <thedrol at pobox.com> wrote:

> If you can't find it you can always use spiral wrap.
>
> Paul
> #9270
>
> Doug Braun wrote:
> > All,
> >
> >       I have a need for some of the black corrugated plastic tubing
> that's used
> > to protect wires and wire harnesses.  But here's the kicker - it needs
to
> > 3/16" ID which is one size smaller than the smallest 1/4" size that
> everyone
> > seems to carry.  I know it exists, because I have a 5" piece but I need
> > more.  Has anyone seen this size?  It's perfect for protecting a run of
> 10
> > AWG insulated wire for expanding a Pantera electrical system.
> >
> > Doug Braun
> > blue 73L #5505