[DeTomaso] FITTING NEW 'CF' DECK LID - MEASUREMENTS

Kirby Schrader kirby.schrader at gmail.com
Wed May 28 14:20:31 EDT 2008


MD,

OK, if you are THAT desperate, when I get home tonight, I'll trace the
piece I cut out of my rear deck, measure it, scan it and send it to
you.

Or is that too high tech?

:-)

Kirby


On Wed, May 28, 2008 at 1:16 PM, Mad Dog Antenucci
<teampantera at yahoo.com> wrote:
> Dan and other engineers,
>
>  Anyone with Kellys IR-EFI intake who have the tall TWM throttle bodies with Kelly's filters? Don't say you do Mikey! ;-]>
>
>  I can give Larry a template on the radius of the back of Kelly's filters but measured from outside edge to outside edge the filters are 13" wide.  What I need is how far back to notch the CF decklid to fit over TB's with filters installed...I was going to go with a full cut like Will K and Tom P have but decided I want the notched lid look instead.
>
>  Dick Drenske didn't keep the original cut specs or the piece he cut out of my old steel decklid and I didn't bring the decklid remains back to California so my bad;-]>
>
>  So before I head out to Nevada on a road trip to dig up the old decklid if you have Kellys intake with the tall TWM throttle bodies let me know how far back you made your cut.
>  BTW, Kelly cofield is drinking pints of warm beer in the UK and has no idea on how far back the cut should be.
>
>  Dawg
>
>
> Daniel C Jones <daniel.c.jones2 at gmail.com> wrote:
>  The guy's name is Tod Buttermore. I'm emailing Guy with the info.
>
> Dan Jones
>
>>> I have been in contact with Daniel Jones and he told me that somebody is
>>> casting new real 351 Cleveland blocks ( NOT SBF Windsor ) , aluminum or
>>> iron . Do you know this guy and do you know where he is ?
>>>
>>>>>I've heard chatter here about the guy who is supposedly casting up new
>> 351C blocks but I never paid attention. Can somebody hit 'reply all' and share
>> the contact information for that fellow?
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
>
>
>
> Mad Dawg Antenucci
> Team Pantera Racing
>  The 1st & still the only vintage race team in open road racing
> www.teampanteraracing.com
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
>



More information about the DeTomaso mailing list