[DeTomaso] AC Expansion Valve Question
JDeRyke at aol.com
JDeRyke at aol.com
Sun Mar 23 15:04:39 EDT 2008
In a message dated 3/22/08 5:20:03 PM, claywillmott at hotmail.com writes:
> Does it matter what type of expansion valve you have (R12 or R134a??) ? If
> so where can you get the R12 valve?
>
Yes. Pantera vendors have both types of valves in stock. I'm told the R-134a
valves have different strength springs and no final filter-screen, both in
order to allow the higher flow rates that the less-efficient R-134a freon needs.
The springs are sort-of adjustable in strength within the valve, but no one
knows exactly what settings we need (or they aren't saying 'cause they're in
business, not in a hooby). And due to the way the thing is designed, you need to
vent all the freon to make minor adjustments. Personally, I'm not inclined to
mess around any more than I already have in front-mounting the condenser; I've
also added an electric pressure switch to disconnect the compressor clutch at
a certain pressure so as to not blow the lines off. Good luck- J Deryke, NOT
an expert
**************
Create a Home Theater Like the Pros. Watch the video on
AOL Home.
(http://home.aol.com/diy/home-improvement-eric-stromer?video=15?ncid=aolhom00030000000001)
More information about the DeTomaso
mailing list