[DeTomaso] 2V Intake Manifolds

[Robert Simpson]

Dan,

Thanks for the post and for taking the time to research this info.  I happen 
to own a Aussie Falcon XB that has 2V heads and can use this info to 
eventually finish my build.  Now if you can find some ceramic coated headers 
that will fit the XB because of the right hand drive set up I would bow and 
exclaim, "I'm not worthy!"  : )  J/K

Bob
Hemet CA
72Pre-L #3468
73Ford Falcon XB
----- Original Message ----- 
From: "Daniel C Jones" <daniel.c.jones2 at gmail.com>
To: <detomaso at realbig.com>
Sent: Monday, March 10, 2008 4:30 PM
Subject: Re: [DeTomaso] 2V Intake Manifolds


>> What's still available in a 2V Single-Plane manifold?
>
> Offenhauser Port-O-Sonic 351C-2V (6122)
> - single plane with Holley carb bolt pattern
>
> Offenhauser Port-O-Sonic 351C-2V (6123)
> - single plane with spread bore carb bolt pattern
>
> Offenhauser Dial-A-Flow 351C-2V (6128)
> - single plane with Holley Dominator carb bolt pattern
> - has interchangeable "turtles" to adjust plenum volume and floor shape
>
> Redline Street Torker (P/N 12-154)
> - single plane manifold designed for 2V heads
> - accepts square bore or spread bore Motorcraft, Holley or Carter 
> Thermoquad
>   carbs
> - looks much like a 2V version of the Strip Dominator
> - http://www.redlineauto.com.au/
>
> Weiand X-Celerator 351V-2V (7516)
> - single plane with Holley carb bolt pattern, no EGR
>
> Parker Funnel Web 2V
> - very tall single plane with Holley carb bolt pattern
>
> TFC 2V
> - very tall single plane with Holley carb bolt pattern
>
> The above are all theoretically available new.  Offy claims they can make
> any of their intakes but you may have to wait until they get a large 
> enough
> order to batch produce.  If they don't have one in stock, don't hold your
> breath.  TFC, Parker and Redline are made in Australia.  The Holley Street
> Dominator is another 2V single plane but is only available used.  Note 
> that
> two different 2V versions of the Weiand and Holley intakes were made.
>
> For the dyno project I have the following 2V intakes available:
>
> Weiand X-Celerator
> Parker Funnel Web
> Holley Street Dominator
> Offenhauser Dual Port
> Offenhauser Port-O-Sonic
> Edelbrock Performer
> Edelbrock Performer RPM Air Gap
>
> I've measured and made notes of all the 2V intakes but still need to enter
> the data into the database.
>
> Dan Jones
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso