[DeTomaso] Greasing the upright Shaft
Asa Jay Laughton
asajay at asajay.com
Sun Jun 29 19:11:57 EDT 2008
Okay, so I'm convinced, putting a zerk in the upright is the best
method. Now I need details. What does one use to drill a hole in the
cast iron upright? What size drill, tap and zerk to use? I'm
mechanically inclined, engineering minded, but without an engineers
brain (my hat's off to all those who are engineers). Everything is
apart so it's the best time to do it. And it looks like I'll be calling
Dennis Quella for some parts. :)
Asa Jay
<this project is starting to cost me a lot of money (though it could be
worse), I'm just afraid of what I'll start thinking once I pull the ZF
to replace gaskets and seals. argh>
Asa Jay Laughton, MSgt, USAFR, Retired
& Shelley Marie
Spokane, WA
1973 Pantera L 5533
[ASASCAT]
******************************
http://www.asajay.com
http://www.351c.info
Mark Tumbarello wrote:
> I have the assemblies that grease via the end, but I recently had the uprights gone through by Quella. He said he used to use this method, but has changed to the drilled upright. He simply capped the end of the shaft with an allen set screw. He mentioned the later method puts the grease right where it's supposed to be on both bushings. YMMV, Mark
>
>
>> Date: Sun, 29 Jun 2008 13:30:22 -0700> From: asajay at asajay.com> To: detomaso at realbig.com> Subject: Re: [DeTomaso] Rear upright removal, photo gallery> > A more pointed question, if I decide to replace the shaft assemblies, > what are the opinions of the different kits?> > I hear that Marino (Pantera East) sells one that greases via the end of > the shaft, while Byers (Precision ProFormance) sells a kit that requires > drilling the upright. Not wishing to drill my upright for a zerk, > Marino's kit looks better, but I'd like to get opinions.> > I tried looking through the last year of Profiles (four issues) and > didn't find any ads, so any help here would be appreciated.> > Thanks,> Asa Jay> > Asa Jay Laughton, MSgt, USAFR, Retired> > & Shelley Marie> Spokane, WA> > 1973 Pantera L 5533> [ASASCAT]> > ****************************** > http://www.asajay.com> http://www.351c.info> > > > _______________________________________________> > Detomaso Forum Managed by POCA> > Archive
>>
> Search Engine Now Available at http://www.realbig.com/detomaso/> > DeTomaso mailing list> DeTomaso at list.realbig.com> http://list.realbig.com/mailman/listinfo/detomaso
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
>
>
>
More information about the DeTomaso
mailing list