[DeTomaso] Tail lamp lens screws

[Dave Londry]

Thanks for all the helpful responses guys.
Boiled down they are:
1. Search     M4.2 x 20 trim oval torx
    and there are quite a few sources - has to be - trim oval - though.
2. Alternate - Back off and use socket head M4.2 x 20.
    Diameter is about the same and if you use an o-ring it makes up for 
the big difference in taper
3. Ace has a surprising range of stuff
4. Doug Braun is an inventor.
dave

Trying to get this to post.
I have a lot of trouble with the filters on this forum

Dave Londry
Embedded Spaces Inc. (ESI)