[DeTomaso] Tail lamp lens screws

[hoppe1]

Dave
I used allen head bolts.  They are not stainless but they are black 
something and they are not rusty.

Another thing I thought was a good idea is I installed little tiny o rings 
on the bolts.  When you do this it seals the bolts against the lense, keeps 
them from coming loose and adds another cushion to the lense so you are less 
likely to crack.
Rich
----- Original Message ----- 
From: "Dave Londry" <davel at emspace.com>
To: "DeTomaso Forum" <detomaso at realbig.com>
Sent: Tuesday, June 17, 2008 6:02 PM
Subject: [DeTomaso] Tail lamp lens screws


>    I just bought some new euro lenses and the old screws are showing some
>    corrosion.
>    New, stainless ones would be nice, but the head diameter is way
>    smaller than a standard oval-head.
>    I see there is an "oval trim" head which sounds right, but I don't see
>    anyone selling them. They measure as M4.2 x 20
> thanks
> dave
>
> -- 
> Dave Londry
> Embedded Spaces Inc. (ESI)
>
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
>