[DeTomaso] Fw: Fw: Roll Bars - Opening for Nebraska Sand Hills RoadRace - august 7-9, 2008

[Will Demelo]

Dude. No I didn't know there were that many bulkheads. 72 Pre L #3544 w/2 pod dash
Will
----- Original Message ----- 
From: MikeLDrew at aol.com 
To: wdemelo at cogeco.ca ; detomaso at realbig.com 
Sent: Wednesday, June 11, 2008 6:34 PM
Subject: Re: [DeTomaso] Fw: Roll Bars - Opening for Nebraska Sand Hills RoadRace - august 7-9, 2008



In a message dated 6/11/08 15 18 2, wdemelo at cogeco.ca writes:



  I have a bulkhead with removable center section for sale. $90? Anyone?



Dude.

You *know* you have to be more specific about what you have.  There were four different bulkhead panels between '71 and '74, and they are not interchangeable.

Before #2000
#2000 to #5284
#5284 to BSN 51640
After BSN #51640 w/seat belt retractor

The first model had the shoulder harness holes in a different spacing.
The second model used the more 'normal' spacing, and was set up for the two-pod dash.
The third model was set up for the one-pod dash (the center consoles were different; the later one was higher).
The fourth model has cutouts for the shoulder harness inertia reels.

I found that I had to chop away a fair amount of fiberglass to adapt a second-model bulkhead into my car once I'd installed the one-pod dash center console.

So, what is that you have on offer?

Mike (still has a second-model bulkhead with removable center section set up for a later console rattling around in his spare bedroom)


**************
Vote for your city's best dining and nightlife. City's Best 2008.
(http://citysbest.aol.com?ncid=aolacg00050000000102)