[DeTomaso] Pop quiz for Aviad pan

[Garth Rodericks]

Aviad's instructions for actual capacity determination are to...
   
  1. Fill an empty pan, installed on the engine in a car sitting on flat ground, with 8qts. of oil.
  2. Mark the dipstick. 
  3. Add one additional quart, and mark the stick again. This is full. The first mark is the low 
      mark. This should be only about 3/8" given the sump area of the pan.
4. Start the engine, letting oil circulate and fill the engine, filter and any cooler or lines that 
      may be part of the system. Shut the engine off, and add back to the top mark. This will 
      be system capacity.
   
  More info from the source: http://www.realbig.com/pipermail/detomaso/2007-November/091125.html