[DeTomaso] Steering rack grease

[Dave Londry]

Hey - I just re-assembled with Lubriplate 105.
No feedback yet though.
dave
6143

asajay at asajay.com wrote:
> Okay, so of these two, which would be the better grease to try?
>
> http://www.napaonline.com/MasterPages/NOLMaster.aspx?PageId=470&LineCode=BK&PartNumber=7652651&Description=Lubriplate+Motor+Assy+Grease
>
> or
>
> http://www.napaonline.com/MasterPages/NOLMaster.aspx?PageId=470&LineCode=SL&PartNumber=SL3331&Description=Engine+Assy+Lube
>
> I'm leaning toward the black tube myself.
>
> Oh, and I got the old bushing out without too much trouble.  I  
> flattened a washer on two sides to get it in and behind the old nylon  
> bushing, then took my long socket extension with an appropriate sized  
> socket and gently hammered it out of the tube from the opposite end.   
> I even got Sam to help by holding the rack tube.
>
> The brass bushing then slid right in and I had to gently hammer it in  
> place the last quarter inch or so.  Drilled the holed, installed the  
> set screw with some lock-tite and we are ready for the lube.
>
> Asa Jay
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
>
>
>   

-- 
Dave Londry
Embedded Spaces Inc. (ESI)
davel at emspace.com

604 721 2278 cell
604 589 9183 phone/fax
Skype:embeddedspaces