[DeTomaso] Exhaust Port Plates for conversion to 2bbl heads with 4bbl headers

[Mark Tumbarello]

Someone on Ebay (I think dscmotorsports but not sure) was selling flat aluminum plates to match 2v heads to 4v headers. They looked to be about 1/4 in thick plus you need both sets of gaskets and longer bolts. Look in the 351c parts stuff you might get lucky. Mark

> Hmmm, my 4v GTS headers fit perfectly on Edlebrock aluminum 2v heads. There may be more aluminum surface area around the port to seal than on cast iron heads and You have to use 4v gaskets. Good luck, Mark>