[DeTomaso] Inline fuel filter size
John McKee
johnmckee at cox.net
Fri Jul 25 01:01:32 EDT 2008
Clay,
Here is another vendor if you have not seen these yet. They list 100, 40
and 10 micron.
http://www.robbmcperformance.com/products/filters.html
John
----- Original Message -----
From: "clay willmott" <claywillmott at hotmail.com>
To: "List Pantera" <detomaso at realbig.com>
Sent: Thursday, July 24, 2008 2:47 PM
Subject: [DeTomaso] Inline fuel filter size
>
> Do most people have 10 micron filters inline before the carb ? Most 6 AN
> inline filters I can find are 35 microns or larger and state "not for fuel
> injection".
> To get a 10 micron I would need to use 8 AN to 6 AN fittings for the
> brands I can find. The Edelbrock/Russell billet filter in 6 AN sates 10
> microm on some sites but the factory site says a 40 micron disc and does
> not mention 10 micron.
>
> I am changing to the mechanical fuel pump and since I have a new sender a
> with the sock filter and a clean tank I plan to use only one filter post
> pump. Any resaon why I would need a pre pump filter also with my set up?
>
> Thanks in advance
>
> Clay
>
> _________________________________________________________________
> With Windows Live for mobile, your contacts travel with you.
> http://www.windowslive.com/mobile/overview.html?ocid=TXT_TAGLM_WL_mobile_072008
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
>
More information about the DeTomaso
mailing list