[DeTomaso] Weirdness with my Cleveland ...
Jim Hendrickson
chendric at bellsouth.net
Fri Jul 11 02:32:36 EDT 2008
Gee. That doesn't look like the same McMaster-Carr that I use.
http://www.mcmaster.com/
-----Original Message-----
From: detomaso-bounces at realbig.com [mailto:detomaso-bounces at realbig.com] On
Behalf Of JDeRyke at aol.com
Sent: Friday, July 11, 2008 2:18 AM
To: eanderson at geotracinternational.com; detomaso at realbig.com
Subject: Re: [DeTomaso] Weirdness with my Cleveland ...
In a message dated 7/10/08 11:56:04 AM, eanderson at geotracinternational.com
writes:
> I am still a little confused as to why a SOLID pin is not used in this
> case. Is there a reason for that?
>
> Solid pins work if you can find the right size, and peen each end
correctly
so it doesn't fly out while the engine's running. Grooved solid pins that
lock
into a hole are even more difficult to find in the right size. Some owners
make up solid pins from chunks of tool steel, and that works, too. The
distributor shaft is hardened so drilling it oversize for a slightly bigger
pin really
need a carbide drill bit. All in all, a roll pin, with a second one inside,
fixes the problem permanently for most, cheaper and easier. McMasters-Carr
in Los
Angeles is famous for having almost everything a hardware store could
possibly carry- at prices 4X what others charge. <www.mcmasterscarr.com>
Good
luck- J DeRyke
**************
Get the scoop on last night's hottest shows and the
live music scene in your area - Check out TourTracker.com!
(http://www.tourtracker.com?NCID=aolmus00050000000112)
_______________________________________________
Detomaso Forum Managed by POCA
Archive Search Engine Now Available at http://www.realbig.com/detomaso/
DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list