[DeTomaso] ATO FUSE PANEL REPLACEMENT/ DO IT!

[Dave McManus]

I have had my share of electrical problems as have most of us. Michael
Shortt told me his recent electrical problems vanished after installing the
replacement fuse panel from Pantera Electronics and Jon Haas. SOBill Taylor
raved about the panel and installation is really simple in an hour or two,
depending on how many breaks you take.

What a beautiful piece of engineering! this is state of the art. It is a
shame it is hidden behind a panel. The instructions and pictures are great
and easy to follow, almost like connect the dots. I spoke with Jon before
buying the panel and learned of his passion for Panteras and his desire to
build affordable units. Jon also owns a Pantera! The ATO Fuse Panel is
specific built by Jon for the Pantera. It is not a retro-fit. It is what I
consider to be a plug-n-play unit. You don't cut wires! You don't have to
understand Ohm's Law or anything about electricity to install the panel.

 

Say goodbye to the Euro style, rubber band held fuses. Two weeks ago I lost
my brake lights, turn signals, and gauges due to a loose fuse. I tested the
fuse & of course it is good. I instinctively closed the gap on the fuse
holder & inserted the fuse. Everything worked again, but for how long?  Hard
to believe all are on a single fuse.

Now, If I blow a fuse, an LED lights next to the blown fuse. I should have
done this years ago.

Here is the link:
http://mysite.verizon.net/vzesb3ri/panteraelectronics/id7.html

IndyDave