[DeTomaso] tie rod ends
MikeLDrew at aol.com
MikeLDrew at aol.com
Tue Jul 8 02:31:45 EDT 2008
In a message dated 7/7/08 16 50 11, justingreisberg at hotmail.com writes:
>
> I have just gotten around to finally putting the front suspension together
> after being dissassembled for 3 years. I have new tie rod ends. On all other
> old cars I have worked on, the tie rod end fits in so that the stud is
> facing up, with the nut on top. No matter how I do it, the only way the pantera
> seems to go is with the stud pointing down to the ground. the shop manual
> does not really show this connection. is this the right way, or do I need to
> take out the welder and adjust things?
>
Every other car you've worked on has been wrong. :>)
The hole in the spindle is tapered; the tie rod end will only go into the
spindle with the nut facing down.
Mike
**************
Gas prices getting you down? Search AOL Autos for
fuel-efficient used cars.
(http://autos.aol.com/used?ncid=aolaut00050000000007)
More information about the DeTomaso
mailing list