[DeTomaso] Fw: IR-EFI PLUMBING SANITY CHECK - NEED PHOTOS
MikeLDrew at aol.com
MikeLDrew at aol.com
Tue Jan 15 03:20:34 EST 2008
In a message dated 1/14/08 23 31 37, Thomas.Tornblom at hax.se writes:
>
> I'm using a Bosch pump from an Audi turbo. It is mounted on a bracket
> under the tank and is suspended by four rubber dampers. You can hear a
> faint whirr from the pump when you switch the ignition on, but it is not
> audible once the engine is running.
>
> See:
> http://www.detomaso.nu/~thomast/efi/pump2.jpeg
>
My Sciroccos use what is, most likely, the same pump. VW has taken it a
step further, and mounted the pump inside of a thick molded rubber casing, which
is then captured by a bracket which bolts to the car. This insulates the
pump vibrations and cuts down the noise even further.
Regardless of the type of pump you choose, the OEMs have figured out superior
mounting schemes, and an hour or so spent in the junkyard could yield you
parts that would be vastly superior to anything you could buy or make yourself.
Mike
**************
Start the year off right. Easy ways to stay in shape.
http://body.aol.com/fitness/winter-exercise?NCID=aolcmp00300000002489
More information about the DeTomaso
mailing list