[DeTomaso] Fw: temp sending unit
Christopher Kimball
chrisvkimball at msn.com
Sat Feb 23 11:49:17 EST 2008
FWI: I mounted a new Dakota Digital sending unit on the block--there's a place for it near the front of the engine. The wire from that can run to a new, more accurate temp gauge, also available from Dakota Digital (about $90, I think) which could give you very accurate temperature readings.
Chris
#3846
> Date: Sat, 23 Feb 2008 09:40:49 -0500
> From: gaino at earthlink.net
> To: detomaso at realbig.com
> Subject: [DeTomaso] Fw: temp sending unit
>
>
>
> -----Forwarded Message-----
> >From: bill gaino <gaino at earthlink.net>
> >Sent: Feb 23, 2008 9:39 AM
> >To: thomas edds <detomaso72 at yahoo.com>
> >Subject: temp sending unit
> >
> >I just replaced my heads with new valves and added some new hoses etc. My temp gauge never really worked like it should. I pulled the wire from the sending unit on the swirl tank and grounded it, it pegged the gauge. Now what sending unit do I need to put in my tank. It appears to be 3/8 npt. I better make sure the tank is grounded, now that I write this I'm thinking of all the FORD blue I painted on that tank. I still want to know what sending unit... Thanks Bill
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list