[DeTomaso] Pantera Stereo/Speaker install question
Doug Braun
doug at silicondesigns.com
Mon Dec 15 13:22:06 EST 2008
Chris,
Another minor correction. You're using the terms electrolytic and
non-polar together below. Electrolytic capacitors are polarized, hence the
need to run 2 in series, back to back. He ideally wants to use a non-polar
type (metallized polypropylene, polyester film or mylar).
I seriously doubt you'll find these are Radio Shack. Here are links to both
a 4 and a 2 uF polypropylene type that would be appropriate. Keep in mind
that Digi-Key has a $25 minimum order.
http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=P10940-ND
http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=P10938-ND
Doug
-----Original Message-----
From: detomaso-bounces at realbig.com
[mailto:detomaso-bounces at realbig.com]On Behalf Of Christopher Kimball
Sent: Monday, December 15, 2008 9:29 AM
To: claywillmott at hotmail.com; Pantera List Serve
Subject: Re: [DeTomaso] Pantera Stereo/Speaker install question
Great, just be sure to use the 25 or 50 VOLT non-polar, electolytic 4
microfarad capacitors on the positive tweeter lead.
Sincerely,
Chris
More information about the DeTomaso
mailing list