[DeTomaso] Stock Front & Rear Calipers for a 73L

[Hans Lindbohm]

Try using a grease gun ( hope that is the right word ) to press the pistons
out or compressed air. That should normally do it.

If you can get a grip of the pistons - they normally stick out a bit of the
caliper - just try to grip and rotate them to make them come loose.

Hans Lindbohm
#4145

-----Ursprungligt meddelande-----
Från: detomaso-bounces at realbig.com [mailto:detomaso-bounces at realbig.com] För
Bill Werner
Skickat: den 7 december 2008 01:10
Till: DeTomaso at realbig.com
Ämne: [DeTomaso] Stock Front & Rear Calipers for a 73L

Hi:  Anyone out there have a set of front & rear calipers that are useable
they want to part with??  I am in the process of rebuilding the stock
calipers on my 73L and I started on the project today.  My car only has
20,000 miles on it, but it has sat for the last 25 years.  I can't remove
some of the pistons in the front calipers.  Any help would be greatly
appreciated.  You can contact me off line.  Thanks.
_______________________________________________

Detomaso Forum Managed by POCA

Archive Search Engine Now Available at http://www.realbig.com/detomaso/

DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso