[DeTomaso] Aluminum flywheel

[Larry - Ohio Time Corp]

I like the idea of studs in an aluminum flywheel too.

What do you thing Goran?

Larry - Cleveland

-----Original Message-----
From: detomaso-bounces at realbig.com [mailto:detomaso-bounces at realbig.com] On
Behalf Of Barry Seib
Sent: Friday, November 28, 2008 8:55 AM
To: DetomasoList; Göran Malmberg
Subject: Re: [DeTomaso] Aluminum flywheel

I'm a little cautious about flywheel and clutch bolts. I'd prefer ARP or
factory approved bolts, but I can see why you feel able to decide what is
safe on your own. You're qualified to do that as a professional engineer
Goran. The problem is finding a bolt that has a shoulder that is short. If
you countersink, the thread gets shorter. Spacing the shoulder out with
washers under the bolt heads looks weak to me. I was actually thinking that
studs might be best in the aluminum.

Barry

-----Original Message-----
From: Göran Malmberg [mailto:hemipanter at hemipanter.se]
Sent: Friday, November 28, 2008 1:44 AM
To: Barry Seib; DetomasoList; Thomas.Tornblom at Hax.SE
Subject: Re: [DeTomaso] Aluminum flywheel


Dosent a regular "bolt shop" sell grade 8 bolts in any dimension?
I am using standard 12.9 or 8.8 bolts myself, which is an european
grade system.
Goran

_______________________________________________

Detomaso Forum Managed by POCA

Archive Search Engine Now Available at http://www.realbig.com/detomaso/

DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso