[DeTomaso] Engine Mounts

[P. Rimov]

The metal washers should sandwich the rubber isolators. Metal washer, 
isolator, aluminum engine mount, isolator then another washer.

Paul
----- Original Message ----- 
From: "MyCars" <MyCars at Comcast.net>
To: "deTomaso List" <detomaso at realbig.com>
Sent: Saturday, August 09, 2008 10:57 AM
Subject: [DeTomaso] Engine Mounts


>I recently got new rubber for my engine mounts. There are 4 of them, two
> for each mount. They are built with a larger metal washer on one side.
>
> If this '|0' is an individual rubber mount, where '|' is the washer and
> '0' is the rubber.
>
> My question is do I place the washers in the mounts:
>
> A) together, like this  0| |0
>
> B) apart, like this |0 0|
>
> C) facing upwards, like this  0| 0|
>
> D) facing downwards, like this  |0 |0
>
> or E) it simply doesn't matter
>
> I think they are supposed to be apart, but I simply can't remember their
> orientation when I took them apart months ago.
>
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso