[DeTomaso] Fw: [SCPOCA] Front vented rotors

John Taphorn jtaphorn at kingwoodcable.com
Thu Apr 24 19:35:53 EDT 2008


The O'Reilly purchased rotors that I listed are two piece.  I knocked out 
the mustang studs and replaced them with the Pantera studs. The Pantera 
studs fit as if made for them.

The application of the two piece Oreilly's vented rotor on the rear is 
inboard.  The car has a four piston Sierra caliper a the rear.  It was 
necessary to mill an 1/8" off the spacer to center the caliper on the rotor. 
I had the spacers milled for $25 at a local machine shop.  I do not know the 
interface with the stock caliper.

Perhaps, you can save $10 bucks on-line, However, none of the on-line sites 
I saw offered a lifetime warranty and if they did - shipping costs would be 
expensive due to weight.

JT
----- Original Message ----- 
From: "John Taphorn" <jtaphorn at kingwoodcable.com>
To: <detomaso at realbig.com>
Sent: Wednesday, April 23, 2008 10:37 PM
Subject: [DeTomaso] Fw: [SCPOCA] Front vented rotors


> Kirk
>
> See below
>
> ----- Original Message ----- 
> From: John Taphorn
> To: SCPOCA at yahoogroups.com
> Sent: Monday, April 14, 2008 10:55 PM
> Subject: Re: [SCPOCA] Front vented rotors
>
>
> Steve
>
> They are available at O'Reilly Auto Parts.  Part # WAG BD60209 Hub and 
> Rotor   $96.99/ ea with a lifetime warranty
>
> They fit perfectly with the caliper and bearings; however, the original 
> dustcap was not a perfect fit.  I cut the rotor on my neighbors lathe to 
> fit the dustcap.  Although, you may find it easier to simply buy the right 
> dust cap while you are there.
>
> This mod is a cheap as they come for quality vented rotors that if you 
> ever warp or gouge are free to replace.
>
> Heck, I even put them on the rear.  Although that was a bigger exercise.
>
> The JT seal of approval!!
>
> JT
>  ----- Original Message ----- 
>  From: Steve Hawkins
>  To: SCPOCA at yahoogroups.com
>  Sent: Monday, April 14, 2008 9:48 PM
>  Subject: [SCPOCA] Front vented rotors
>
>
>
>  Which year Mustang has the vented rotors that are the same size and 
> bearing as the front rotors on the Pantera?
>
>  Steve
>
>  __._,_.___
>  Messages in this topic (1) Reply (via web post) | Start a new topic
>  Messages | Files | Photos | Links | Database | Polls | Members | Calendar
>
>  Change settings via the Web (Yahoo! ID required)
>  Change settings via email: Switch delivery to Daily Digest | Switch 
> format to Traditional
>  Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe Visit Your 
> Group
>  Y! Sports for TV
>  Access it for free
>
>  Get Fantasy Sports
>
>  stats on your TV.
>
>  Cat Groups
>  on Yahoo! Groups
>
>  Share pictures &
>
>  stories about cats.
>
>  Home Improvement
>  on Yahoo! Groups
>
>  Find tips & tricks
>
>  for doing it yourself.
>  .
>  __,_._,___
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso 





More information about the DeTomaso mailing list