[DeTomaso] ceramic coat vs. wrap
JDeRyke at aol.com
JDeRyke at aol.com
Fri Apr 11 12:26:12 EDT 2008
In a message dated 4/11/08 8:36:33 AM, msm at portata.com writes:
> >> I have noticed that my IR-temp gun reads significantly lower temps on
> shiny metal parts than if they are dull>>.
>
> That is a known problem with the IR-temp sensors. Don't use them on your
> bling-bling parts.
>
True. Besides having to guess at an emissivity factor for the guns on shiny
stuff, another thing to consider is, most IR guns have a fairly large spot they
detect, and if you're only a few thousandths off on your target, the results
can be hundreds of degrees apart on successive shots on the same pipe. I found
it to be close-to-useless as a temp gauge on headers. FWIW- J DeRyke
**************
Planning your summer road trip? Check out AOL Travel Guides.
(http://travel.aol.com/travel-guide/united-states?ncid=aoltrv00030000000016)
More information about the DeTomaso
mailing list