[DeTomaso] clutch disk
JDeRyke at aol.com
JDeRyke at aol.com
Sun Apr 6 18:56:42 EDT 2008
In a message dated 4/6/08 6:07:13 AM, wdemelo at cogeco.ca writes:
> Is the stock clutch disk available from Napa?
>
No. The Pantera is set up with a thinner than normal 11" disc. If you install
a std Mustang disc which is thicker, you'll likely have to completely
readjust the clutch system- the slave cylinder bellcrank AND slave rod length, pedal
position etc. It can be done but you have to know what adjustments are
possible and where they are. I'd ask your vendor what they sell and how it works as a
drop-in. Any savings on a cheap disc probably will be eaten up trying to
figure out what to do to make it work. And god-forbid you'd try adding a generic
clutch pressure plate, which always comes with centrifugal bob-weights that
will remachine the inside of your bell housing the first time you fire up. Good
luck- J Deryke
**************
Planning your summer road trip? Check out AOL
Travel Guides.
(http://travel.aol.com/travel-guide/united-states?ncid=aoltrv00030000000016)
More information about the DeTomaso
mailing list