[DeTomaso] aluminum crank pulley ?
Steve Hawkins
shawkins777 at comcast.net
Tue Apr 1 21:06:53 EDT 2008
I had one made but with a 1 inch wider diameter to overdrive the
auxiliaries.
Steve
-----Original Message-----
From: detomaso-bounces at realbig.com [mailto:detomaso-bounces at realbig.com] On
Behalf Of JDeRyke at aol.com
Sent: Tuesday, April 01, 2008 11:28 AM
To: dave at damardirect.com; detomaso at realbig.com
Subject: Re: [DeTomaso] aluminum crank pulley ?
March Industries is about the only one I know of to make pullies that fit
the
usual 4-bolt 351C harmonic balancer. Many other Ford V-8s use three bolts.
In
addition, you need to decide if you want to slow down or speed up the
alternator & water pump with a different diameter crank pulley or stay with
the stock
diameter. March has a pretty extensive catalogue, too. Good luck- J Deryke
**************
Create a Home Theater Like the Pros. Watch the video on AOL Home.
(http://home.aol.com/diy/home-improvement-eric-stromer?video=15&
ncid=aolhom00030000000001) _______________________________________________
Detomaso Forum Managed by POCA
Archive Search Engine Now Available at http://www.realbig.com/detomaso/
DeTomaso mailing list
DeTomaso at list.realbig.com http://list.realbig.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list