[DeTomaso] starter motor studs
JDeRyke at aol.com
JDeRyke at aol.com
Tue Apr 1 02:38:36 EDT 2008
In a message dated 3/31/08 10:59:24 AM, tcabanski at tencom.com writes:
> Not sure why they went with that set up were they used a two threaded shaft
> with english threads on one side & metric for the end.
>
Best guess: the stud screws into an Italian-made bellhousing but the starter
is U.S made.
Good luck- J DeRyke
**************
Create a Home Theater Like the Pros. Watch
the video on AOL Home.
(http://home.aol.com/diy/home-improvement-eric-stromer?video=15&ncid=aolhom00030000000001)
More information about the DeTomaso
mailing list