[DeTomaso] Compression ratio question
JDeRyke at aol.com
JDeRyke at aol.com
Sat Sep 22 13:40:12 EDT 2007
What compression pressure you get depends on a bunch of things- not the least
being the way the test is run, but no one thinks about bore size. A 3-1/2"
bore/2.8-L engine running at 10:1 C.R with an Isky cam regularly gave me around
200+- psi while a similar 10:1 setup in a 4" bore/5.8-L engine typically
gives 160 psi. All this is why I seldom run compression tests any more; I get
more info from a leakdown test. FWIW- J DeRyke
**************************************
See what's new at http://www.aol.com
More information about the DeTomaso
mailing list