[DeTomaso] Help needed with lower a-arm shaft kit installation

[Pantera 1887]

I expected that too.  I just wanted to let Charles know that a least Pantera
Performance has the correct parts.  Of interest is that the bushing are
coated with a Teflon like coating so you would not want to ream them out or
sand them for the shaft to fit. 

 

Mike      

 

From: MikeLDrew at aol.com [mailto:MikeLDrew at aol.com] 
Sent: Saturday, September 01, 2007 1:56 AM
To: panteraplace at hotmail.com; detomaso at realbig.com
Subject: Re: [DeTomaso] Help needed with lower a-arm shaft kit installation

 


In a message dated 8/31/07 14 19 25, panteraplace at hotmail.com writes:





My parts came from Pantera Performance Center and they fit perfectly.
Here's and page that shows the steps of rebuilding the assembly
http://www.panteraplace.com/page87.htm



That appears to be identical to the kit Marino at Pantera East sells.  I
have the PPC version too.  The Pantera parts business is an incestuous one,
and often there are two good solutions marketed by six different shops....

Mike


**************************************
Get a sneak peek of the all-new AOL at
http://discover.aol.com/memed/aolcom30tour