[DeTomaso] NEED SOURCE FOR 180 DEGREE HEADERS FABRICATION

[John Bentley (jab)]

no, doesn't make sense to hang turbos off the 180 headers.  For me, I
want to go with a turbo for good HP at 6000 feet.
 
JB
 
 

________________________________

From: Ken Green [mailto:kenn_green at yahoo.com] 
Sent: Thursday, October 18, 2007 10:26 AM
To: John Bentley (jab)
Cc: MikeLDrew at aol.com; mmerritt at eventvehicles.com;
teampantera at yahoo.com; detomaso at realbig.com
Subject: Re: [DeTomaso] NEED SOURCE FOR 180 DEGREE HEADERS FABRICATION


John,
 
    I thought Dennis plans to go to turbos at some point.  Do you think
it makes sense to hang turbos off the collectors of 180 deg headers?
 
    One reason I decided to go to turbos was that part of the cost is
offset by the headers.  I would have guessed that Dennis could have
built a turbo motor for what his motor with the IR EFI will cost.
 
Ken

"John Bentley (jab)" <jab at cisco.com> wrote:

	that sounds about right.....$3500/7hp. Nice big blig number!
They will
	get you a trophy at the car show though....right dawg? Still,
the sound
	is worth it. :)
	
	JB
	
	
	
	________________________________
	
	From: Curt Hall [mailto:cuvee at sbcglobal.net] 
	Sent: Thursday, October 18, 2007 9:42 AM
	To: John Bentley (jab); GW; johnmckee at cox.net
	Cc: MikeLDrew at aol.com; mmerritt at eventvehicles.com;
	teampantera at yahoo.com; detomaso at realbig.com
	Subject: Re: [DeTomaso] NEED SOURCE FOR 180 DEGREE HEADERS
FABRICATION
	
	
	I thought someone did run dyno test on a number of different
headers,
	and the test showed a deference of about 7hp?
	
	Curt 
	
	"John Bentley (jab)" wrote: 
	
	I didn't know anyone cared about HP..... Its all about the looks
	and
	that SOUND!
	
	JB
	
	
	
	-----Original Message-----
	From: detomaso-bounces at realbig.com
	[mailto:detomaso-bounces at realbig.com]
	On Behalf Of GW
	Sent: Thursday, October 18, 2007 10:22 AM
	To: johnmckee at cox.net
	Cc: MikeLDrew at aol.com; mmerritt at eventvehicles.com;
	teampantera at yahoo.com; detomaso at realbig.com
	Subject: Re: [DeTomaso] NEED SOURCE FOR 180 DEGREE HEADERS
	FABRICATION
	
	Has anyone ever dynoed an engine with a GOOD set of headers and
	a set of
	180's just to see the difference (no other changes).
	
	Gary
	_______________________________________________
	
	Detomaso Forum Managed by POCA
	
	Archive Search Engine Now Available at
	http://www.realbig.com/detomaso/
	
	DeTomaso mailing list
	DeTomaso at list.realbig.com
	http://list.realbig.com/mailman/listinfo/detomaso
	_______________________________________________
	
	Detomaso Forum Managed by POCA
	
	Archive Search Engine Now Available at
	http://www.realbig.com/detomaso/
	
	DeTomaso mailing list
	DeTomaso at list.realbig.com
	http://list.realbig.com/mailman/listinfo/detomaso
	
	
	
	_______________________________________________
	
	Detomaso Forum Managed by POCA
	
	Archive Search Engine Now Available at
http://www.realbig.com/detomaso/
	
	DeTomaso mailing list
	DeTomaso at list.realbig.com
	http://list.realbig.com/mailman/listinfo/detomaso