[DeTomaso] Fw: QUESTION DOG BONE AIR CLEANER

Gray Gregory rgg at gregorycook.com
Tue Oct 2 15:25:29 EDT 2007


This has always been the suspected choke point for this air cleaner and
some people have fabricated taller bases to get it up off the carb.

Frankly we were all quite surprised that the effect on my car was only
1hp. This test was done on a chassis dyno so the cost was 1rwhp.

Gray

-----Original Message-----
From: detomaso-bounces at realbig.com [mailto:detomaso-bounces at realbig.com]
On Behalf Of Will Demelo
Sent: Tuesday, October 02, 2007 2:16 PM
To: detomaso at realbig.com
Subject: [DeTomaso] Fw: QUESTION DOG BONE AIR CLEANER





> My dogbone air-cleaner cost me 11 rwhp on my stroker. This is not
because 
> of the lack of elements but because the top of the aircleaner housing
sits 
> too close to the carb opening.
> There are a number of online sites that you can use to calculate the 
> element surface required for certain horsepower. The stock dogbone has

> more than enough surface area to support 550fwhp.
> Will
> ----- Original Message ----- 
> From: <MikeLDrew at aol.com>
> To: <clewis at dancemusic.net>; <detomaso at realbig.com>
> Sent: Tuesday, October 02, 2007 12:27 PM
> Subject: Re: [DeTomaso] QUESTION DOG BONE AIR CLEANER
>
>
>>
>> In a message dated 10/2/07 9 12 32, clewis at dancemusic.net writes:
>>
>>
>>> I have seen where people double up filter elements on both sides to
>>> increase the surface area and therfore air flow of this style of air

>>> cleaner. What
>>> parts are need to do this? Does it require a longer bolt to hold the
now
>>> wider air filter elements on? Where do you get the bolt and how much

>>> longer
>>> should it be?
>>>
>>
>> The filter is readily available from K&N; chances are there is a part

>> number
>> stamped into the edge of your existing filter, but if not you can
take 
>> the
>> measurements and track it down that way.
>>
>> An appropriate length bolt (or stud) can be found in your local
hardware
>> store.   Bring the old one with you, have a proper measurement in
mind, 
>> go look
>> for the worker with the silver hair and he'll know right where you
need 
>> to go to
>> find the replacements. :>)
>>
>> Mike
>>
>>
>> **************************************
>> See what's new at
>> http://www.aol.com
>> _______________________________________________
>>
>> Detomaso Forum Managed by POCA
>>
>> Archive Search Engine Now Available at
http://www.realbig.com/detomaso/
>>
>> DeTomaso mailing list
>> DeTomaso at list.realbig.com
>> http://list.realbig.com/mailman/listinfo/detomaso
> 

_______________________________________________

Detomaso Forum Managed by POCA

Archive Search Engine Now Available at http://www.realbig.com/detomaso/

DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso



More information about the DeTomaso mailing list