[DeTomaso] Fw: exhaust ports on aftermarket heads

[Will Demelo]

If the 180's are on stock heads, than they'll fit on CHI heads (at least 
3V's).
Will D.

----- Original Message ----- 
From: <MikeLDrew at aol.com>
To: <hoppe1 at cox.net>; <detomaso at realbig.com>
Sent: Wednesday, November 28, 2007 12:36 AM
Subject: Re: [DeTomaso] exhaust ports on aftermarket heads


>
> In a message dated 11/27/07 19 20 29, hoppe1 at cox.net writes:
>
>
>> What aftermarket heads can I use and still bolt the headers to them?
>>
>
> What, specifically, are you trying to achieve by changing heads?   Your 
> car
> has (I assume) closed-chamber 4v heads, which are pretty good.   Raising 
> the
> exhaust port with stuffers (I've been told) can improve things somewhat.
>
> Aluminum heads are fine, but I agree with you--I wouldn't change heads if 
> it
> meant wrecking that beautiful De Tomaso 180 degree exhaust system.
>
> Mike
>
>
> **************************************
> Check out AOL's list of 2007's
> hottest products.
>
> (http://money.aol.com/special/hot-products-2007?NCID=aoltop00030000000001)
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso