[DeTomaso] Fw: Front End Jacking Tool
Art Stephens
artstephens at charter.net
Fri Nov 16 19:01:19 EST 2007
Thanks John,
I really got a kick out of making it, fun stuff.
Art
----- Original Message -----
From: "John Bentley (jab)" <jab at cisco.com>
To: "Art Stephens" <artstephens at charter.net>; <detomaso at realbig.com>
Sent: Friday, November 16, 2007 3:16 PM
Subject: Re: [DeTomaso] Fw: Front End Jacking Tool
> Nice job, Art.
>
> JB
>
>
>
> -----Original Message-----
> From: detomaso-bounces at realbig.com [mailto:detomaso-bounces at realbig.com]
> On Behalf Of Art Stephens
> Sent: Friday, November 16, 2007 3:06 PM
> To: detomaso at realbig.com
> Subject: [DeTomaso] Fw: Front End Jacking Tool
>
>
>
>
> Well, it only took me ten years to get around to it, but I
> finally did it. After years of using two jacks to get the front end of
> the car up on jack stands, I finally made a fixture to use with only
> one jack to get the front end up. It really works well for me, I am
> quite happy with the results. You can see pictures of it at the link
> below. I have no front air dam, so I don't know if that would present
> a problem or not. The fixture has bowed slightly, either from lifting
> the car or from excessive heat during welding? At this point, I have
> no worries about the fixture bending so much as to become unsafe, but I
> will keep an eye on it. It should be easy enough to beef it up if
> necessary. Please excuse the somewhat hideous welds, doh! The
> material I used was 1.125" round stock and 1.5" x .75" x .120"
> rectangular tubing. One of my floor jacks is way too tall to get the
> fixture under the car. My shorter floor jack, almost fits. It is
> almost 3.5" with the saddle removed and almost 4.5" with the saddle in
> place. It looks like my car needs a jack that is about 3" tall without
> the saddle. Looks like a good excuse to buy an new jack! :-))). There
> may be better solutions out there, but this is the best I could come up
> with.
>
> Art
>
> http://good-times.webshots.com/photo/2892382570099754276wUaEBF
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.503 / Virus Database: 269.15.33/1133 - Release Date:
> 11/15/2007 8:57 PM
>
>
More information about the DeTomaso
mailing list