[DeTomaso] Leak Down Okay - Wot say you engine experts out there

[Larry - Ohio Time Corp]

MD,

If you put in rings you will need to at least hone the block. Each time you
do this it makes the hole a bit larger. (just like....) I would just put the
bearings in. The drag boys do it after each run.

Larry (then what do I know) - Cleveland



-----Original Message-----
From: detomaso-bounces at realbig.com [mailto:detomaso-bounces at realbig.com] On
Behalf Of Mad Dog Antenucci
Sent: Tuesday, November 06, 2007 9:38 PM
To: detomaso at realbig.com
Subject: [DeTomaso] Leak Down Okay - Wot say you engine experts out there

Hey You Engine Experts,
   
  Leak down test on my engine turned out great....bearings look new...not
sure if its the recyled tractor oil or the fact that I had too much
compression and cam in a stroked Cleveland  block but happy with results.
I'd like to think it is a result of my superior driving skills...okay blind
luck.  Maybe engine builder had something to do with it too!
  BAAAAH ;-]>
   
  Since I'm adding a new cam to the engine wot say you experts on replacing
all the low cost rings, bearings etc as long as engine is out?
   
   


Mad Dawg Antenucci 
Team Pantera Racing 
  The 1st & still the only vintage race team in open road racing 
www.teampanteraracing.com
_______________________________________________

Detomaso Forum Managed by POCA

Archive Search Engine Now Available at http://www.realbig.com/detomaso/

DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso