[DeTomaso] ZF questiom
JDeRyke at aol.com
JDeRyke at aol.com
Mon Nov 5 13:38:14 EST 2007
Try this without the half shafts. You'll often get pulsing from pad drag on
one of the rear rotors. About the only other thing that could cause such a
pulsing feel is warped limited slip clutches, and you could check this by removing
the pads in the rear calipers, then adding a torque wrench to a wheel nut
with one wheel up in the air & one on the ground and checking to see if the force
to turn both wheels is equal (somewhere around 40 ft-lbs).
I don't think its a ZF problem. The gear teeth are so tough they don't
distort and chipped gears would feel quite different. Good luck- J DeRyke
**************************************
See what's new at http://www.aol.com
More information about the DeTomaso
mailing list