[DeTomaso] spot welder
Larry - Ohio Time Corp.
larry at ohiotimecorp.com
Thu May 24 09:29:55 EDT 2007
Very true Bill.
One of my migs is a small portable 110 VAC mig welder. In the shop I run
12/3 for the 110 branches. When using the welder with an extension cord you
can see the loss in power.
Larry - Cleveland
----- Original Message -----
From: <SOBill at aol.com>
To: <jmontero at fcmat.org>
Cc: <detomaso at realbig.com>
Sent: Thursday, May 24, 2007 1:21 AM
Subject: Re: [DeTomaso] spot welder
> The 110 unit will draw 2x the current from your building wiring as will
> the
> 220 unit.
>
> As long as your building wiring is heavy enough to supply the required
> current without a significant drop in voltage there should be no
> difference in
> performance between the units.
>
> If you have 220 available, I would get a 220 unit.
>
> SOBill Taylor
> sobill at aol.com
>
>
>
> ************************************** See what's free at
> http://www.aol.com.
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
>
>
More information about the DeTomaso
mailing list