[DeTomaso] Edelbrock Air-Gap Intake

[MikeLDrew at aol.com]

In a message dated 5/23/07 5:38:27 PM, artstephens at charter.net writes:


> Another possibility without getting too complicated would be to make a 
> sheet
> metal spacer plate to raise up your screen in the rear.  The plate could
> attach to your brackets and the screen.  I raised my screen front and rear
> to accept as much intake/air cleaner as possible.  My limit at the back was
> where the screen came up to the deck lid.  I didn't like the look with the
> screen above the deck lid.  You could loosen up your screen,  raise it up as
> high as you like,  then measure the distance between the air cleaner and the
> screen.  That should tell you how much more air cleaner you can get away
> with. 
> 

>>>Don't forget, normally the air cleaner extends below the lateral confines 
of the decklid too.   So raising the screen won't help unless you notch the 
decklid too.

Mike


**************************************
 See what's free at 
http://www.aol.com.