[DeTomaso] Fw: Vibration Help

[Visit ProvaMo.com]

Maybe Dizzy shear pin?  Could bad timing cause the vib?

Chuck


-----Original Message-----
From: detomaso-bounces at realbig.com [mailto:detomaso-bounces at realbig.com]On
Behalf Of Will Demelo
Sent: Thursday, May 03, 2007 12:34 PM
To: detomaso at realbig.com
Subject: [DeTomaso] Fw: Vibration Help

Well, it's not the fouled plugs. Changed them and it's still shaking.
Going to check the engine mounts and restore to the way it was last year.
Next, I'll remove the ZF again and check the flywheel.
Will
----- Original Message -----
From: JDeRyke at aol.com
To: wdemelo at cogeco.ca ; detomaso at realbig.com
Sent: Thursday, May 03, 2007 3:05 PM
Subject: Re: [DeTomaso] Vibration Help


In a message dated 4/30/07 2:50:26 PM, wdemelo at cogeco.ca writes:

<< I've got a burnt ignition wire (from the header) and perhaps a fouled
plug. Could this cause a vibration? >>

Yes- the engine will 'miss'. Running on 7 cylinders even intermittently, any
V-8 will shake. Over- or under-tightened engine mounts will also likely
cause
a shake, as will plugged carb jets, excess ignition advance, etc. Garage
work
for you this weekend, Will! Good luck- J Deyke
************************************** See what's free at
http://www.aol.com.
_______________________________________________

Detomaso Forum Managed by POCA

Archive Search Engine Now Available at http://www.realbig.com/detomaso/

DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.467 / Virus Database: 269.6.2/787 - Release Date: 5/3/2007 2:11
PM

No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.467 / Virus Database: 269.6.2/787 - Release Date: 5/3/2007 2:11
PM