[DeTomaso] Vibration Help

Dan Courtney dfcex at pacbell.net
Wed May 2 22:31:24 EDT 2007


I have the same problem so I'll also be checking this. Everything else was loose from my installer so I wouldn't be surprised. I just hope the flywheel bolts are not loose.

Dan
Dan F. Courtney


Excalibur Commercial Real Estate Services
La Jolla, CA

Phone (858) 551-5455
Fax (858) 551-5456

  ----- Original Message ----- 
  From: MikeLDrew at aol.com 
  To: zumzum at cox.net ; dfcex at pacbell.net ; detomaso at realbig.com 
  Sent: Wednesday, May 02, 2007 9:12 AM
  Subject: Re: [DeTomaso] Vibration Help


  FWIW, I worked on a car once that suffered these sorts of vibrations after a clutch change; turns out they hadn't fully tightened the bolts between the bellhousing and the block.  Even though they LOOKED tight, there was some movement available between the two, which only manifested itself when the car was underway.  Check that out too....

  Mike


  **************************************
  See what's free at http://www.aol.com. 


More information about the DeTomaso mailing list