[DeTomaso] sheet metal screws- Sources, Web Sites, Prices and Sizes
Chris Difani
cdifani at pacbell.net
Sat Mar 17 03:05:52 EDT 2007
Joel:
One of my favorite suppliers is McMaster-Carr. These guys are nation wide,
and have an outstanding selection of most everything. One of their
characteristics that I especially appreciate is that their fasteners are all
manufactured to standards. There aren't any "no name" bolts in their bins.
They also have an excellent selection, at least as far as I've ever needed.
Unfortunately in terms of metric sheet metal screws, they only have
stainless, in these sizes:
Thread Size Length
DIN 7981 DIN Specification - Pan Head
M2.2 6.5 mm 94997A125 $8.34 per Pack of 100
M2.2 9.5 mm 94997A130 8.55 per Pack of 100
M2.9 6.5 mm 94997A225 8.90 per Pack of 100
M2.9 9.5 mm 94997A250 8.97 per Pack of 100
M2.9 13 mm 94997A275 9.17 per Pack of 100
M3.5 13 mm 94997A300 7.59 per Pack of 50
M3.5 19 mm 94997A325 9.55 per Pack of 50
M3.5 25 mm 94997A350 9.76 per Pack of 50
M3.9 13 mm 94997A400 7.62 per Pack of 50
M3.9 19 mm 94997A425 12.17 per Pack of 50
M3.9 25 mm 94997A450 9.52 per Pack of 25
DIN 7982 Type C DIN Specification - Flat Head
M2.9 9.5 mm 95844A225 $7.86 per Pack of 50
M2.9 13 mm 95844A250 8.10 per Pack of 50
M2.9 19 mm 95844A275 8.24 per Pack of 50
M3.5 13 mm 95844A300 7.21 per Pack of 50
M3.5 19 mm 95844A325 10.07 per Pack of 50
M3.5 25 mm 95844A350 10.21 per Pack of 50
M3.9 13 mm 95844A400 7.86 per Pack of 50
M3.9 19 mm 95844A425 8.10 per Pack of 50
M3.9 25 mm 95844A450 8.24 per Pack of 25
M4.2 13 mm 95844A500 9.62 per Pack of 50
M4.2 19 mm 95844A525 9.79 per Pack of 50
M4.2 25 mm 95844A550 14.28 per Pack of 25
In case something screws up on this chart, they have two styles, flat head
(countersunk) and panhead. And in the following sizes, 2.2 thru 4.2MM
diameter, in lengths ranging from 6.5 to 25MM.
The web site is: http://www.mcmaster.com/ then scroll down to the
"Fastening and Sealing" listing (right column, almost to the bottom), and
click on the Sheet Metal Screws category. This will take you to the main
heading, and you can drill down from there.
There's another company, http://www.boltdepot.com/ , which may have a larger
selection... or not... just depends on what you need. Then for the real
small stuff, like camera repair, there's
http://www.microfasteners.com/index.cfm or even
http://store.nutsandbolts.com/meallpr.html And then I'd go to Aircraft
Spruce and Supply, http://www.aircraftspruce.com/index.php and see what
they have.
Personally, my favorite suppliers are McMaster-Carr, then Aircraft Spruce
and Supply. The other's are okay, I just haven't done that much with them.
Theoretically you should be able to find what you need somewhere in this
"mess", but if you don't, and you have a specific size, type, metal, and so
forth, get back to me, and I'll check with some of my more outre suppliers.
Chris
Chris Difani
'73 L #5829 "LITNNG"
Sacramento, CA
Email: cdifani at pacbell.net
----- Original Message -----
From: "Joel Montero" <jmontero at fcmat.org>
To: <detomaso at realbig.com>
Sent: Friday, March 16, 2007 9:03 PM
Subject: [DeTomaso] sheet metal screws
> Can anyone suggest a good, reliable source for metric sheet metal
> screws?
>
>
>
> Thanks,
>
>
>
> Joel
>
>
>
> Joel Montero, CEO
>
> FCMAT
>
> jmontero at fcmat.org <mailto:jmontero at fcmat-csis.org>
>
> 707-775-2852
>
> Barbara Smith, Executive Assistant
>
> 661-636-4308
>
> bsmith at fcmat.org <mailto:bsmith at fcmat.org>
>
>
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list