[DeTomaso] Need an Oilite non-magnetic pilot busing

[SOBill at aol.com]

Mike,
 
Here is pilot bearing info:
 
>>>>>http://www.springertool.com   pilot  bearing removal tool  ~ $22
 
Pilot bearing removal: pack the pilot bearing hole with soaking wet  toilet 
paper, insert clutch disc alignment tool, rap with a mallet: out pops  pilot 
bearing  
 
Pilot bearing removal: start threading a 3/4 inch tap into the  0.697 pilot 
bearing hole, keep turning when the tap bottoms against the  crankshaft, the 
bearing will be pulled out. The 3/4 tap is for sure less  than $22 at OSH or 
Home Depot.
 
The clutch pilot bearing is ~17 mm ID for the -2 ZF and ~15 mm ID  for the -1 
ZF 
 
OEM '74L (-2 ZF) pilot bearing measured:1.377 OD 0.580 Deep w/  0.679 
(17.2466 mm) Hole thru to fit 0.669 (16.9926mm) transmission input  shaft
 
Pilot Bearing: Oilite Bronze, NONmagnetic, Self-Lubricating   $25. ea. plus 
$3.85 shipping. Contact Marlin  at:>>>>>panther at starnetdial.net 
 
 
SOBill  Taylor
sobill at aol.com



************************************** See what's free at http://www.aol.com.