[DeTomaso] Headlights, fans, etc

[Dan Courtney]

And just connect the ground wire right to the chassis or splice into it and let it still go into the harness?

Dan 
Dan F. Courtney


Excalibur Commercial Real Estate Services
La Jolla, CA

Phone (858) 551-5455
Fax (858) 551-5456

  ----- Original Message ----- 
  From: SOBill at aol.com 
  To: dfcex at pacbell.net 
  Cc: detomaso at realbig.com 
  Sent: Wednesday, August 29, 2007 4:54 PM
  Subject: Re: [DeTomaso] Headlights, fans, etc


  Dan,

  Chris is right on.

  Find the ground for each lamp and ground it to the chassis of the car.

  This can be done by grinding a spot to bare metal, put a ring type crimp on the wire to be ground, use a hex head selfdrilling/selftapping screw to ground the ring, hit both side of the screw with a coat of paint or undercoat after testing the lights.

  The chassis is the best ground you can have. The headlamp buckets are not a good ground.

  SOBill Taylor
  sobill at aol.com





------------------------------------------------------------------------------
  Get a sneak peek of the all-new AOL.com.