[DeTomaso] Aluminum Rear Carriers on Ebay
littofreakydevil at aol.com
littofreakydevil at aol.com
Thu Aug 16 08:19:32 EDT 2007
Fred,
Since you designed it using emachineshop's software, did you get a quote for fun and see how much it would cost to have them make it? :)
Larry
-----Original Message-----
From: F&D Terry <gt5s at bcpl.net>
To: Mike Thomas <mbefthomas at comcast.net>
Cc: JDeRyke at aol.com; detomaso at realbig.com
Sent: Thu, 16 Aug 2007 5:04 am
Subject: Re: [DeTomaso] Aluminum Rear Carriers on Ebay
Mike,
Having made two aluminum intake manifolds for my superchargers, I
suggest those uprights are CNC machined from a solid. No evidence of any
welds welds can be seen from the 4 photos provided and the faces are
typical of the flat and uniform surfaces typical of CNC machining. I
designed an aluminum upright using EmachineShop's software and the
weight calculated by their software was about 6lbs.
Fred T.
Mike Thomas wrote:
>Right, thanks Jack
>Wasn't really interested in buying them, more curious about them. Larry
>Stock rebuilt my stock uprights a couple of years ago, and that will have to
>do me for the duration.
>Mike
>
> _____
>
>From: JDeRyke at aol.com [mailto:JDeRyke at aol.com]
>Sent: Wednesday, August 15, 2007 11:20 AM
>To: mbefthomas at comcast.net; detomaso at realbig.com
>Subject: Re: [DeTomaso] Aluminum Rear Carriers on Ebay
>
>
>In a message dated 8/15/07 6:22:22 AM, mbefthomas at comcast.net writes:
>
>
>
><< Who makes these? They look nice, but are they much lighter? >>
>
>
>
>Likely weigh less than half the iron OEMs 20 lbs. But don't get too excited,
>
>
>Mike. I can't tell exactly from the single photo but they look like
>
>fabrications and if so, the quality of the welds would be the determining
>factor. I'd
>
>want to see documents on heat-treat and X-rays before I installed & dumped
>the
>
>clutch on our car. The lower section looks very open and unsupported.... If
>
>they are weldments, the 'builder' could be anyone with a rear carrier for
>
>reference, and a TIG welder. And a big pile of 6061. FWIW- J DeRyke
>
>
>
>
>**************************************
> Get a sneak peek of the all-new AOL at
>
>http://discover.aol.com/memed/aolcom30tour
>_______________________________________________
>
>Detomaso Forum Managed by POCA
>
>Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
>DeTomaso mailing list
>DeTomaso at list.realbig.com
>http://list.realbig.com/mailman/listinfo/detomaso
>
>
>
>
>
_______________________________________________
Detomaso Forum Managed by POCA
Archive Search Engine Now Available at http://www.realbig.com/detomaso/
DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso
________________________________________________________________________
AOL now offers free email to everyone. Find out more about what's free from AOL at AOL.com.
More information about the DeTomaso
mailing list