[DeTomaso] Bad Vibrations
Dan Courtney
dfcex at pacbell.net
Tue Aug 14 01:03:06 EDT 2007
Thank You,
John,
The 1/2 shaft bolts are all tight and I forgot to mention the vibration is only when the engine is revving (no vibration while it's coasting, even at the same speed). I assume the 1/2 shaft bolts, or an out of balance 1/2 shaft would vibrate regardless.
Dan
Dan F. Courtney
Excalibur Commercial Real Estate Services
La Jolla, CA
Phone (858) 551-5455
Fax (858) 551-5456
----- Original Message -----
From: John Maffeo
To: Dan Courtney ; detomaso at realbig.com
Sent: Monday, August 13, 2007 3:02 PM
Subject: Re: [DeTomaso] Bad Vibrations
Dan,
Have you checked all 16 of the half-shaft bolts? That might be a place to start.
Good luck,
John
Dan Courtney <dfcex at pacbell.net> wrote:
The Winged Warrior has the shakes pretty bad, starting around 2,000 rpm's. Pretty much seems like engine or internal issues.
This is on a engine which was "refreshed" with new rings and bearings.
The flywheel and pressure plate has been r&r'd after being re-balanced and it seems a little better, but still shakes.
The higher the rpm, the worse the vibration.
It has a Centerforce clutch and the engine was recently installed, motor mounts don't look right but the mechanics keep telling me it's an internal vibration.
Any thoughts?
Dan
Dan F. Courtney
Excalibur Commercial Real Estate Services
La Jolla, CA
Phone (858) 551-5455
Fax (858) 551-5456
_______________________________________________
Detomaso Forum Managed by POCA
Archive Search Engine Now Available at http://www.realbig.com/detomaso/
DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso
------------------------------------------------------------------------------
Pinpoint customers who are looking for what you sell.
More information about the DeTomaso
mailing list