[DeTomaso] Engine Screen Needed
MikeLDrew at aol.com
MikeLDrew at aol.com
Thu Aug 2 16:40:20 EDT 2007
In a message dated 8/2/07 9 18 26, daniel.c.jones2 at gmail.com writes:
> A friend is in need of an engine screen, specifically a 1972 type
> engine screen that has been cut. Mike is running a 393C with
> flat pad Blue Thunder and there isn't enough clearance under
> the earlier screen to run an air filter.
>
I have a 1972, with a tall Blue Thunder that was cut to make it flat, and am
(barely) running my stock engine screen, uncut. The key is to use a drop
base air cleaner.
Having said that, my screen is of the later type, with a hump that is raised
in the front (level in the back). Those were used from mid-72 on; I presume
your friend's is an earlier type? Those probably would have clearance
issues, and unfortunately they don't interchange.
FWIW aftermarket screens are available from Pantera East and Kirk Evans,
which have a taller hump center molded in. Very, very nice.
Mike
**************************************
Get a sneak peek of the all-new
AOL at http://discover.aol.com/memed/aolcom30tour
More information about the DeTomaso
mailing list