[DeTomaso] Power steering update

[GW]

Cool!


SOBill at aol.com wrote:
> Sorry .... should have Reply All.
>  
>    
> You are so right.
>  
> I have been off the car for two weeks since my wife took a tumble  on the 
> sidewalk. She is pretty much OK now .... now it's jury duty.   Anyway, back to 
> work next week.
>  
> I have the rack correctly positioned and the driver side tie rod  shortened 
> and installed. This was a matter of trimming the tie rod, trimming the  tie rod 
> end, and reaming the steering arm holes to 10 deg to fit the Honda  tie rod 
> ends. So things are coming along. I need to do the passenger tie rod and  
> install the steering shaft U-joint. Then I will build the final mounting  frame 
> work ..... what I have now is just tack welded together
>  
> Along the way I built a typical bump steer gauge which uses two  dial 
> indicators and then struck on measuring bump steer using two Harbor Freight  lasers  
> ...... the laser method works great and can be easily  done.
>  
> So it is all still in work. I will post articles about the bump  steer 
> methods and the steering system progress.
>  
> Who says they wouldn't know what to do if they retired. I haven't  been bored 
> 1 minute in the past 8 years. Just buy a Pantera.
>  
> Have fun,
>  
>
>  
> SOBill  Taylor
> sobill at aol.com
>
>
>
> ************************************** Get a sneak peek of the all-new AOL at 
> http://discover.aol.com/memed/aolcom30tour
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
>
>